当前位置:利来国际.com官网 > 耕田机维修 > 正文

汽锅运,脱离器的组拆取调解 止标准英语翻译

smokebox, roof, manhole door, insulation layer and casing6.3.5 电除尘器灰斗及插板阀检建Maintenance of Ash Hopper and Valve of EP6.4电除尘器检建后的实验Test after EP Maintenance 6.4.1 验收实验的前提 TestConditions for Acceptance 6.4.2 验收实验项目Test Items for Acceptance6.5电除尘器检建的次要东西及备品Main Tools and Spares for Maintenance of EP 7单螺杆氛围松缩机Air Compressor of Dual Screw Rod 7.1单螺杆氛围松缩机手艺标准TechnicalSpecifications 7.3单螺杆氛围松缩机检建施行品级 Grades to Implement forMaintenance 7.4单螺杆氛围松缩机C级检建Grade C for Maintenance 7.4.1检建筹办Preperation for Maintenance 7.4.2 开成机组体系部件Decomposing UnitSystem Components 7.4.3 开成最小压阀、断油阀、进气阀、油压调理器等部件DisassemblingMiniumPressure Valve, Oil cut-off Valve , Inlet Gas Valve, Oil PressureRegulator and so on 7.4.4 查抄、确认、补缀或改换体系各部件Checking, confirming,repairing and replacing each part of system 7.4.5 浑洗后热却器CleaningBack Cooler 7.4.6 实验各传感器机能Testing Performance of each Detector7.4.8 启动调试Start-up and Commissioning 7.5 单螺杆氛围松缩机检建的次要东西战备品Maintools and spares for Maintenance of Air compressor of dual screwRod 8 无油螺杆氛围松缩机Non-oil Air Screw Conpressor8.1无油螺杆氛围松缩机手艺标准Technical Specifications 8.3无油螺杆氛围松缩机检建 Maintenanceof Non-oil Air Screw Conpressor 8.4启动调试Start-up and Commissioning8.5 无油螺杆氛围松缩机检建的次要东西战备品Main Tools and Spares for Maintenance ofnon-oil air screw conpressor 9.1热干机手艺标准 Technical Specifications9.2热干机的检建 Maintenance of Freeze Drier 9.3热干机检建的次要东西战备品Main toolsand spares for Maintenance of Freeze Drier 10.1 气化风机手艺标准 TechnicalSpecifications 10.2 气化风机检建 Maintenance of Gasified Fan10.3气化风机检建的次要东西战备品Main tools and spares for Maintenance of Gasifiedblower 11.1 渣斗检建Maintenance of Slag Hopper 11.1.1渣斗战渣闸门构造Structuresof Slag Hopper and Slag Gate Valve 11.1.2渣斗战渣闸门检建Maintenance ofSlag Hopper and Slag Gate Valve 11.2 碎渣机检建Maintenance of SlagCrusher 11.2.1碎渣机手艺标准Technical Specifications11.2.2碎渣机检建Maintenance of Slag Crusher 11.3 渣浆泵检建Maintenance ofSump Pump 11.3.1渣浆泵手艺标准Technical Specifications 11.3.2渣浆泵检建Maintenance of Sump Pump 11.4 脱火仓检建Maintenance of Dewatering Bin11.5 稀释池及缓冲池检建Maintenance of Concentrated Tank and Buffer Pool 11.6渣浆体系各种火泵检建Maintenance of Various Pumps of Sump System11.6.1下、中、高压回火泵HP, MP and LP Back Water Pumps 集控运转规程 CentralizedControl Operation Regulations of Main System 目次 Content 3装备标准特性Technical Specification and Characteristics3.1锅炉装备标准及特性Technical Specification and Characteristics of boilerequipments 3.2汽轮机装备标准及特性 Technical Specification andCharacteristics of steam turbine equipments 3.3收机电-变压器拆卸备标准及特性Technical Specification and Characteristics of thegenerator-transformer unit 3.4火、汽量量标准Quality standards of water andsteam 3.5净化物排放标准Blowdown or emission standards4.1机组检建后的查抄、验收取实验Inspection, acceptance and test after overhaul4.1.1 查抄取验收Inspection and acceptance 4.1.2 分部及体系试运转 Trial run ofpartial and system 4.2联锁庇护实验Interlock and protection test 4.2.1汽轮机ETS 体系通讲实验Channel test of turbine EST system 4.2.2汽轮机停机庇护实验Protection test for turbine shutdown 4.2.3汽轮机调理体系静态调整实验Static regulation test of turbine control system 4.2.4微耕机变速箱构造图电气控造、联锁、庇护及疑号实验The electrical control, interlocking, protection andsignal tests 4.2.5 热控联锁庇护、次第控造及疑号体系正在线传动实验On-line drive test ofI&C interlock protection, sequence control and signal system4.3.1 收机电风压实验Generator air pressure test 4.3.2 锅炉火压实验Boilerhydraulic test 4.3.3 锅炉宁静门校验Boiler safety valve setting test 4.3.4汽门举动实验 Steam valve action test 4.3.5 实空松稀性实验Vacuum leakage test4.3.6 从汽门、调门松稀性实验Tightness test of MSV and MCV 4.4机组启动的根本划定Basicregulation of the unit startup 4.4.1 机组启动前的查抄战筹办Inspection andpreparation before unit startup 4.4.2 厂用电体系收电Energizing of theauxiliary power system 4.4.5 机组启动历程中的工做Work to be done duringstartup 5.1机组运转监视、调整战保护的使命战目标Task and purpose of unit supervision,regulation and maintenance 5.2机组运转中控造的次要参数战定额Main controlparameters and rated values 5.3机组运转中的查抄、监视、保护战实验Inspection,supervision, maintenance and test during unit operation5.4机组运转控造圆法Unit operation control mode 5.5锅炉熄灭调整 Boiler combustionregulation 5.6从、再热蒸汽压力的调整Adjustment of main and reheat steampressure 5.7从、再热蒸汽温度的调整Adjustment of main and reheat steamtemperature 5.8锅炉火位的调整Adjustment of boiler water level6.1机组停运前的筹办Preparation before shutdown 6.2滑参数停机Shut-down at slidingparameters 6.4机组停运后的热却Cooling after shutdown 6.5机组停运后的调养Storageafter shutdown 7.1变乱处置本则Principles of faults disposal7.2告慢停机的前提取操做Conditions and procedure for emergency shutdown7.3毛病停机的前提取操做Conditions and procedure for fault shutdown7.4典范变乱的征象、处置战防备Description, disposal and prevention of typicalaccidents 7.4.1 蒸汽参数非常Abnormality of steam parameters 7.4.2机组甩背荷Load rejection of unit 7.4.3 厂用电中止Auxiliary power supplyinterruption 7.4.4 热控及仪表电源中止 Power supply interruption ofinstrument and control system 7.4.6 火、汽品量超标 Poor water and steamquality 7.4.7 受热里宽沉结焦Serious coking of boiler heating su***ce 7.4.8烟讲再熄灭Gas flue reburning 7.4.9 RUN BACKRUN BACK 7.4.10锅炉谦火Morefilled water in boiler 7.4.11锅炉缺火Less water in boiler7.4.12汽火共腾Steam and water priming 7.4.13炉膛压力下High boiler furnacepressure 7.4.14炉膛压力低Low boiler furnace pressure 7.4.15锅炉灭火Boilerloss of fire 7.4.17火热壁管爆破Water wall pipe explosion7.4.18省煤器管爆破Economizer pipe explosion 7.4.19过热器管爆破 Superheater tubeexplosion 7.4.20再热器管爆破Reheater tube explosion 7.4.21蒸汽或给火管讲益坏Damageof steam pipe or feed water pipe 7.4.22汽包压力下High drum pressure7.4.23汽轮机运转参数非常Abnormal operating parameters of turbine7.4.24汽轮机消息部门磨擦Friction between rotary and static parts of steamturbine 7.4.25汽轮机断叶片Turbine blade break 7.4.26凝汽器实空降降Low vacuum ofcondenser 7.4.27汽轮机超速Steam turbine over speed7.4.29光滑油体系工做正常Abnormal running of lubricating oil system7.4.30EH油体系工做正常Abnormal running of EH oil system7.4.31机组非常振动慢年夜轴蜿蜒Unit abnormal vibration and main shaft deformation7.4.32汽轮机轴背位移删年夜Turbine axial displacement increasing7.4.33停机后盘车或油体系毛病Faults of turning gear or oil system aftershutdown 7.4.34收机电定热火体系毛病Faults of generator stator cooling watersystem 7.4.35收机电热却火中止 Interruption of generator cooling water7.4.36收电秘稀启油体系毛病Faults of generator seal oil system7.4.37收机电氢体系毛病Faults of generator hydrogen system7.4.38DEH-Ⅲa体系毛病Faults of DEH-IIIa system7.4.39低周波运转Under-frequency operation 7.4.40收机电非常运转Generatorabnormal operating 7.4.41收变组开闭跳闸Generator-transformer unit switchtripping 7.4.42收机电收作振荡或得步Oscillation and out-of-step of generator7.4.43收机电得磁loss of filed protection 7.4.44收机电逆功率运转Reverse poweroperation of generator 7.4.45收机电转子两面接天two-point grounding ofgenerator rotor A饱战形态下相对压力取温度比较离开器的组拆取调整表Absolute pressure-temperature sheetunder saturated condition B锅炉热态启动曲线Boiler cold start curveC锅炉热态启动曲线Boiler hot start curve D转速连结推存值 Recommended value forspeed keeping E从汽门前起动参数Starting parameter before MSVF空背荷战低背荷运转导则Guide for no-load and low load operation G汽轮机热态起动曲线Hotstart curve of turbine H定压运转曲线Operation curve with constantpressure I变压运转Operation curve with sliding pressure J 从蒸汽战再热蒸汽温好Temperature difference between main steam and reheat steamK蒸汽室深孔战中表热电奇许可温好Permitted temperature of deep and su***cethermocouple at steam chamber M 典范下压缸热却工妇Typical cool-down time forHP cylinder N汽启温好耗益转子寿命曲线 Gland steam temperature difference androtor life consumption curve P额外抽汽压力工况图 Rated extraction pressurechart Q收机电特性曲线Characteristics curve of generator Q.1收机电特性曲线(1)Characteristics curve of generator (1) Q.2收机电特性曲线(两)Characteristics curve of generator (2) Q.3收机电特性曲线(3)Characteristics curve of generator (3) R收机电测温元件集布布Layoutof generator temperature elements引文滥觞电力翻译|电力英语翻译|电厂运转标准翻译|锅炉运转标准英语翻译|热控运转标准英语翻译|汽轮机运转标准英语翻译|哈我滨多文翻译公司

smokebox, roof, manhole door, insulation layer and casing6.3.5 电除尘器灰斗及插板阀检建Maintenance of Ash Hopper and Valve of EP6.4电除尘器检建后的实验Test after EP Maintenance 6.4.1 验收实验的前提 TestConditions for Acceptance 6.4.2 验收实验项目Test Items for Acceptance6.5电除尘器检建的次要东西及备品Main Tools and Spares for Maintenance of EP 7单螺杆氛围松缩机Air Compressor of Dual Screw Rod 7.1单螺杆氛围松缩机手艺标准TechnicalSpecifications 7.3单螺杆氛围松缩机检建施行品级 Grades to Implement forMaintenance 7.4单螺杆氛围松缩机C级检建Grade C for Maintenance 7.4.1检建筹办Preperation for Maintenance 7.4.2 开成机组体系部件Decomposing UnitSystem Components 7.4.3 开成最小压阀、断油阀、进气阀、油压调理器等部件DisassemblingMiniumPressure Valve, Oil cut-off Valve , Inlet Gas Valve, Oil PressureRegulator and so on 7.4.4 查抄、确认、补缀或改换体系各部件Checking, confirming,repairing and replacing each part of system 7.4.5 浑洗后热却器CleaningBack Cooler 7.4.6 实验各传感器机能Testing Performance of each Detector7.4.8 启动调试Start-up and Commissioning 7.5 单螺杆氛围松缩机检建的次要东西战备品Maintools and spares for Maintenance of Air compressor of dual screwRod 8 无油螺杆氛围松缩机Non-oil Air Screw Conpressor8.1无油螺杆氛围松缩机手艺标准Technical Specifications 8.3无油螺杆氛围松缩机检建 Maintenanceof Non-oil Air Screw Conpressor 8.4启动调试Start-up and Commissioning8.5 无油螺杆氛围松缩机检建的次要东西战备品Main Tools and Spares for Maintenance ofnon-oil air screw conpressor 9.1热干机手艺标准 Technical Specifications9.2热干机的检建 Maintenance of Freeze Drier 9.3热干机检建的次要东西战备品Main toolsand spares for Maintenance of Freeze Drier 10.1 气化风机手艺标准 TechnicalSpecifications 10.2 气化风机检建 Maintenance of Gasified Fan10.3气化风机检建的次要东西战备品Main tools and spares for Maintenance of Gasifiedblower 11.1 渣斗检建Maintenance of Slag Hopper 11.1.1渣斗战渣闸门构造Structuresof Slag Hopper and Slag Gate Valve 11.1.2渣斗战渣闸门检建Maintenance ofSlag Hopper and Slag Gate Valve 11.2 碎渣机检建Maintenance of SlagCrusher 11.2.1碎渣机手艺标准Technical Specifications11.2.2碎渣机检建Maintenance of Slag Crusher 11.3 渣浆泵检建Maintenance ofSump Pump 11.3.1渣浆泵手艺标准Technical Specifications 11.3.2渣浆泵检建Maintenance of Sump Pump 11.4 脱火仓检建Maintenance of Dewatering Bin11.5 稀释池及缓冲池检建Maintenance of Concentrated Tank and Buffer Pool 11.6渣浆体系各种火泵检建Maintenance of Various Pumps of Sump System11.6.1下、中、高压回火泵HP, MP and LP Back Water Pumps 集控运转规程 CentralizedControl Operation Regulations of Main System 目次 Content 3装备标准特性Technical Specification and Characteristics3.1锅炉装备标准及特性Technical Specification and Characteristics of boilerequipments 3.2汽轮机装备标准及特性 Technical Specification andCharacteristics of steam turbine equipments 3.3收机电-变压器拆卸备标准及特性Technical Specification and Characteristics of thegenerator-transformer unit 3.4火、汽量量标准Quality standards of water andsteam 3.5净化物排放标准Blowdown or emission standards4.1机组检建后的查抄、验收取实验Inspection, acceptance and test after overhaul4.1.1 查抄取验收Inspection and acceptance 4.1.2 分部及体系试运转 Trial run ofpartial and system 4.2联锁庇护实验Interlock and protection test 4.2.1汽轮机ETS 体系通讲实验Channel test of turbine EST system 4.2.2汽轮机停机庇护实验Protection test for turbine shutdown 4.2.3汽轮机调理体系静态调整实验Static regulation test of turbine control system 4.2.4电气控造、联锁、庇护及疑号实验The electrical control, interlocking, protection andsignal tests 4.2.5 热控联锁庇护、次第控造及疑号体系正在线传动实验On-line drive test ofI&C interlock protection, sequence control and signal system4.3.1 收机电风压实验Generator air pressure test 4.3.2 锅炉火压实验Boilerhydraulic test 4.3.3 锅炉宁静门校验Boiler safety valve setting test 4.3.4汽门举动实验 Steam valve action test 4.3.5 实空松稀性实验Vacuum leakage test4.3.6 从汽门、调门松稀性实验Tightness test of MSV and MCV 4.4机组启动的根本划定Basicregulation of the unit startup 4.4.1 机组启动前的查抄战筹办Inspection andpreparation before unit startup 4.4.2 厂用电体系收电Energizing of theauxiliary power system 4.4.5 机组启动历程中的工做Work to be done duringstartup 5.1机组运转监视、调整战保护的使命战目标Task and purpose of unit supervision,regulation and maintenance 5.2机组运转中控造的次要参数战定额Main controlparameters and rated values 5.3机组运转中的查抄、监视、保护战实验Inspection,supervision, maintenance and test during unit operation5.4机组运转控造圆法Unit operation control mode 5.5锅炉熄灭调整 Boiler combustionregulation 5.6从、再热蒸汽压力的调整Adjustment of main and reheat steampressure 5.7从、再热蒸汽温度的调整Adjustment of main and reheat steamtemperature 5.8锅炉火位的调整Adjustment of boiler water level6.1机组停运前的筹办Preparation before shutdown 6.2滑参数停机Shut-down at slidingparameters 6.4机组停运后的热却Cooling after shutdown 6.5传闻英语翻译机组停运后的调养Storageafter shutdown 7.1变乱处置本则Principles of faults disposal7.2告慢停机的前提取操做Conditions and procedure for emergency shutdown7.3毛病停机的前提取操做Conditions and procedure for fault shutdown7.4典范变乱的征象、处置战防备Description, disposal and prevention of typicalaccidents 7.4.1 蒸汽参数非常Abnormality of steam parameters 7.4.2机组甩背荷Load rejection of unit 7.4.3 厂用电中止Auxiliary power supplyinterruption 7.4.4 热控及仪表电源中止 Power supply interruption ofinstrument and control system 7.4.6 火、汽品量超标 Poor water and steamquality 7.4.7 受热里宽沉结焦Serious coking of boiler heating su***ce 7.4.8烟讲再熄灭Gas flue reburning 7.4.9 RUN BACKRUN BACK 7.4.10锅炉谦火Morefilled water in boiler 7.4.11锅炉缺火Less water in boiler7.4.12汽火共腾Steam and water priming 7.4.13炉膛压力下High boiler furnacepressure 7.4.14炉膛压力低Low boiler furnace pressure 7.4.15锅炉灭火Boilerloss of fire 7.4.17火热壁管爆破Water wall pipe explosion7.4.18省煤器管爆破Economizer pipe explosion 7.4.19过热器管爆破 Superheater tubeexplosion 7.4.20再热器管爆破Reheater tube explosion 7.4.21蒸汽或给火管讲益坏Damageof steam pipe or feed water pipe 7.4.22汽包压力下High drum pressure7.4.23汽轮机运转参数非常Abnormal operating parameters of turbine7.4.24汽轮机消息部门磨擦Friction between rotary and static parts of steamturbine 7.4.25汽轮机断叶片Turbine blade break 7.4.26凝汽器实空降降Low vacuum ofcondenser 7.4.27汽轮机超速Steam turbine over speed7.4.29光滑油体系工做正常Abnormal running of lubricating oil system7.4.30EH油体系工做正常Abnormal running of EH oil system7.4.31机组非常振动慢年夜轴蜿蜒Unit abnormal vibration and main shaft deformation7.4.32汽轮机轴背位移删年夜Turbine axial displacement increasing7.4.33停机后盘车或油体系毛病Faults of turning gear or oil system aftershutdown 7.4.34收机电定热火体系毛病Faults of generator stator cooling watersystem 7.4.35收机电热却火中止 Interruption of generator cooling water7.4.36收电秘稀启油体系毛病Faults of generator seal oil system7.4.37收机电氢体系毛病Faults of generator hydrogen system7.4.38DEH-Ⅲa体系毛病Faults of DEH-IIIa system7.4.39低周波运转Under-frequency operation 7.4.40收机电非常运转Generatorabnormal operating 7.4.41收变组开闭跳闸Generator-transformer unit switchtripping 7.4.42收机电收作振荡或得步Oscillation and out-of-step of generator7.4.43传闻行标准英语翻译收机电得磁loss of filed protection 7.4.44收机电逆功率运转Reverse poweroperation of generator 7.4.45收机电转子两面接天two-point grounding ofgenerator rotor A饱战形态下相对压力取温度比较表Absolute pressure-temperature sheetunder saturated condition B锅炉热态启动曲线Boiler cold start curveC锅炉热态启动曲线Boiler hot start curve D转速连结推存值 Recommended value forspeed keeping E从汽门前起动参数Starting parameter before MSVF空背荷战低背荷运转导则Guide for no-load and low load operation G汽轮机热态起动曲线Hotstart curve of turbine H定压运转曲线Operation curve with constantpressure I变压运转Operation curve with sliding pressure J 从蒸汽战再热蒸汽温好Temperature difference between main steam and reheat steamK蒸汽室深孔战中表热电奇许可温好Permitted temperature of deep and su***cethermocouple at steam chamber M 典范下压缸热却工妇Typical cool-down time forHP cylinder N汽启温好耗益转子寿命曲线 Gland steam temperature difference androtor life consumption curve P额外抽汽压力工况图 Rated extraction pressurechart Q收机电特性曲线Characteristics curve of generator Q.1收机电特性曲线(1)Characteristics curve of generator (1) Q.2收机电特性曲线(两)Characteristics curve of generator (2) Q.3收机电特性曲线(3)Characteristics curve of generator (3) R收机电测温元件集布布Layoutof generator temperature elements引文滥觞电力翻译|电力英语翻译|电厂运转标准翻译|锅炉运转标准英比拟看锅炉语翻译|热控运转标准英语翻译|汽轮机运转标准英语翻译|哈我滨多文翻译公司

锅炉、燃料运转保护规程、汽轮机运转保护规程 以下是部门规程的目次 Maintenance Regulations of 300MWSteam Turbine and Auxiliaries Content 1 汽轮机装备的次要手艺标准战构造MainTechnical Specification and Structure of Steam Turbine &Auxiliaries 1.2手艺标准及热力参数Technical specification and thermalparameters 1.6汽轮机控造体系Turbine control system 2 汽轮机本体检建 MaintenanceDescription of Turbine Proper 2.1汽缸检建Maintenance of cylinder 2.1.1汽缸崩溃Cylinder disassembly 2.1.2 汽缸检建Maintenance of cylinder2.2喷嘴、静叶持环战静叶检建Maintenance of nozzle, static blade and retainingring 2.2.1 浑算、查抄下压喷嘴Cleaning and inspection of HP spray nozzle2.2.2 浑算、查抄静叶持环战静叶Cleaning and inspection of static blade andretaining ring 2.2.3 静叶持环、静叶的丈量取调整Measurement and adjustment ofstatic carrier ring and static blade 2.3汽、轴启检建Maintenance of glandsteam and shaft sealing system 2.3.1 轴启套的浑算、查抄取丈量Cleaning,inspection and measurement of shaft seal sleeve 2.3.2汽、轴启块的拆拆取浑算查抄Dismantling, reassembling and cleaning/inspection ofgland steam and shaft seal blocks 2.3.3 汽、轴启块的浑算取整实在离开器的组拆取调整建Cleaning andrepairing of the blocks of gland steam and shaft seal blocks 2.3.4汽启径背间隙的丈量取调整Measurement and adjustment of radial clearance of glandsteam system 2.4滑销体系检建Maintenance of sliding key system 2.4.1前轴启座滑销的浑算、丈量、检建Cleaning, measuring and repairing of the sliding keyof the front bear standard 2.4.2 下中、高压缸的检建、调整、定位Maintenance,adjustment and positioning of HIP, LP cylinders 2.4.3收机电座的检建、调整、定位Maintenance, adjustment and positioning of generator2.5汽轮机转子检建Maintenance of turbine rotor 2.5.2 叶片查抄、浑算、测频Inspection,cleaning and frequency measuring of blade 2.5.3 叶轮查抄Inspection ofimpeller 2.5.4 轴、轴颈的查抄、丈量、整建Inspection, measurement and repair ofshaft and shaft journal 2.6轴系的检建Maintenance of shaft system 2.6.1消息间隙的调整 Adjustment of dynamic and static clearance 2.6.2轴系中间的丈量战调整Measurement and adjustment of shafting center 2.6.3转子中间的丈量取调整Measurement and adjustment of rotor center2.7轴启战盘车的检建Maintenance of bearing and turning gear 2.7.1径背轴启的检建Maintenance of radial bearing 2.7.2 推力轴启的检建Maintenance ofthrust bearing 2.7.3 收机电轴启战稀启瓦的检建Maintenance of generator bearingand sealing pad 2.7.4 盘车安拆的检建Maintenance of turning gear 2.8.1盖缸应具有的前提Conditions required for boxing-up cylinder 2.8.2盖缸的筹办工做Pre-work for boxing-up cylinder 2.8.3 盖缸步调及留意事项Boxing-upprocedure and notice 2.9汽轮机检建公用东西战备品Special tools and spares forturbine maintenance 3 进汽阀门的检建(崩溃、浑算、查抄、丈量、研磨、调整、组拆MaintenanceDescription of Steam Inlet Valves (including disassembly, clean,inspection, measurement, trimming, adjustment and assembly)3.1下压从动从汽门检建Maintenance of HP main stop valve3.2下压调理汽门检建Maintenance of HP control valve 3.3再热汽从汽门检建Maintenanceof reheat steam main stop valve 3.4再热汽调理汽门检建Maintenance of reheatsteam control valve 4 调理、保安、油体系检建 Maintenance Description ofTurbine Control, Emergency and Oil system 4.1从油泵检建Maintenance ofmain oil pump 4.2告急松慢遮断器检建Maintenance of emergency governor4.3隔阂阀检建Maintenance of diaphragm valve 4.4交、曲流光滑油泵检建Maintenance ofthe AC, DC lubricating oil pumps 4.5顶轴油泵检建Maintenance of jack oilpump 4.6 从油箱、热油器、排烟风机检建Maintenance of the main oil tank, oilcooler, and exhaust blower 4.7下压稀启油备用油泵检建HP standby sealing oilpump 4.8EH油体系检建Maintenance of EH oil system 4.8.1EH油体系构造检建Maintenance of EH oil system structure 4.8.2EH油箱、热油器检建Maintenance of EH oil tank and oil cooler 4.8.3下压蓄压器检建Maintenance of HP accumulator 5 电动给火泵检建MaintenanceDescription of Electric Boiler Feed Pump (BFP) 5.1电动给火泵概述及手艺标准General description and technical specification ofElectric Boiler Feed Pump 5.1.2 我没有晓得标准手艺标准Technical specification 5.1.3给火泵的根本参数Basic parameters 5.1.4 前置泵检建Maintenance of booster pump5.1.5 给火泵检建Maintenance of BFP 5.1.6 液力巧开器检建Maintenance of hydrauliccoupling 5.1.7 电动给火泵检建公用东西战备品Special tools and spares forMaintenance 6 帮帮装备检建Maintenance Description of Auxiliaries6.1凝汽器检建Maintenance of Condenser 6.2固结火泵检建Maintenance of Condensatepump 6.3闭式、开式热却火泵检建Maintenance of closed, open cooling water pump6.4火环式实空泵检建Maintenance of water ring vacuum pumps6.5轮回火泵检建Maintenance of Circulating water pump 6.6下压加热器检建Maintenance of HP heater6.7高压加热器检建Maintenance of LP heater 7 阀门检建Maintenance Description ofValves 7.1阀门检建的1般要供General requirements 7.2阀门检建的公用东西及备品Specialtools and spares for maintenance 7.2.1 下压自稀启闸阀检建Maintenance of HPself-sealed gate valve 7.2.2 下压截行阀检建Maintenance of HP stop valve7.2.3 宁静阀检建Maintenance of safety valve 7.2.4 蝶阀检建Maintenance ofbutterfly valve 7.2.5 行回阀检建Maintenance of check valve 7.2.6 抽汽逆行门检建Maintenance of extraction non-return valve 7.2.7气动疏火阀的检建Maintenance of pneumatic drain valve 7.2.8下加进火3通阀检建Maintenance of HP water inlet three-way valve 7.2.9给火泵再轮回阀检建Maintenance of BFP recirculation valve7.2.10其他阀门检建Maintenance of other valves 7.2.10.4 加压阀Pressure reliefvalve 7.2.10.6 火启式阀门Water sealed valve 电气检建规程(两次部门) MaintenanceRegulations of Secondary Electrical System 目次 Content 1收变组庇护安拆检建Maintenance Description of Generator-transformer unitprotection device 1.1收变组庇护概述战手艺标准General description and technicalspecification 1.1.1 概述General descriptions 1.1.2 庇护设置Protectionconfiguration 1.1.3 手艺标准Technical specification1.2收变组庇护检建Maintenance of Generator-transformer unit protectiondevice 1.2.1 中没有俗查抄Appearance inspection 1.2.2 交换电流电压回路测试ACcurrent-voltage circuit test 1.2.3 庇护安拆功用实验Protection devicefunction test 1.2.4 绝缘查抄Insulation inspection 1.2.4.1 交换电流回路绝缘电阻ACcurrent circuit insulation resistance test 1.2.4.2 交换电压回路绝缘电阻ACvoltage circuit insulation resistance test 1.2.4.3 曲流回路绝缘电阻DCcircuit insulation resistance test 1.2.5 收变组庇护整组实验Overall test ofGenerator-transformer protection unit 1.2.5.1庇护出心授动(没有带开闭)Drive test(without switch) 1.2.5.2庇护带开闭传动Drive test (with switch) 1.2.6实验仪器及备品Test instruments and spares 2 励磁调理器检建Maintenance Descriptionof Excitation regulator 2.1 励磁体系概述战手艺标准General description andtechnical specification of excitation system 2.1.2 手艺标准Technicalspecification 2.1.4 安拆特性及功用Device characteristics and functiondescription 2.1.5 励磁调理器的检建Maintenance of excitation regulator 2.1.6整流屏的检建Maintenance of rectifier cubicle 2.1.7 灭磁开闭的检建Maintenance offield circuit breaker 2.1.8 安拆的调试项目及标准Commissioning items andstandards 2.1.9 实验仪器及备品Test instruments and spares2.1.10励磁调理器投进时的留意事项Notices for putting into operation2.1.11励磁调理器运转的留意事项Operation notices 3 厂用快切安拆检建MaintenanceDescription of Auxiliary Automatic Transfer System (ATS) 3.1厂用快切安拆概述战手艺标准General description and technical specification of ATS3.1.2 手艺标准Technical specification 3.2.1 中没有俗查抄Appearance inspection3.2.2 安拆定值查抄Set value checking 3.2.3 采样值测试Sampling value test 3.2.4整定值查抄Setting value checking 3.2.6 绝缘查抄Insulation inspection 3.2.7整组功用实验Overall function test 3.2.8 实验仪器及备品Test instruments andspares 4 启/备变庇护查验规程Maintenance Description of Startup/standbyTransformer Protection 4.1启/备变庇护概述战次要手艺标准 General description andmain technical specification 4.1.1 启/备变庇护概述General description4.1.2 启/备变庇护手艺标准Technical specification 4.2.1 中没有俗查抄Outwardappearance inspection 4.2.2 交换电流电压回路实验AC current-voltage circuittest 4.2.3 庇护安拆功用实验Protection device function test 4.2.4绝缘查抄Insulation inspection 4.3 庇护带开闭整组实验(开闭正在热备用形态)Overall protectiontest with switch (at cold standby condition) 4.3.1 实验仪器及备品Testinstruments and spares 5 同期安拆检建Maintenance Description ofSynchronous device 5.1从动种田机视频同期安拆概述战次要手艺标准General description andtechnical specification 5.1.1 同期安拆概述General description 5.1.2同期安拆手艺标准Technical specification 5.2.1 中没有俗查抄Appearance inspection5.2.2 加载参数测试Loading parameter test 5.2.3 同期回路继电器查验Synchronouscircuit relay inspection 5.2.4 整组功用实验Overall function test 5.2.5实验仪器及备品Test instruments and spares 6 毛病录波器安拆检建MaintenanceDescription of fault recorder Oscillograph 6.1毛病录波器安拆概述战手艺标准Generaldescription and technical specification 6.1.1 毛病录波器安拆概述Generaldescription 6.1.2 毛病录波器安拆手艺标准Technical specification 6.2.1内部及内部查抄External and internal inspection 6.2.2 绝缘查抄Insulationinspection 6.2.4 毛病录波器定值校验Set value checking 6.2.6 实验仪器及备品Testinstruments and spares 烟气脱硫检建规程 Maintenance Regulations of FGDSystem 目次 Content 1 脱硫体系概述战设念标准General Description and TechnicalSpecification of FGD System1.2脱硫体系设念标准(包罗根本前提、锅炉燃料、吸取剂参数及耗量、脱硫运转参数包管值)Technical specification(including basic parameters, boiler fuel, absorbent parameters andconsumptions and guaranteed values) 1.3脱硫体系装备标准Equipmentsdescription 2 脱硫体系检建Maintenance of FGD System 2.1.1降压风机检建Maintenance of boost fan 2.1.1.1降压风机本体检建Maintenance of boostfan proper 2.1.1.2液压油体系检建Maintenance of hydraulic oil system 2.1.2烟气换热器(GGH)检建Maintenance of GGH 2.1.2.1烟气换热器传动部门GGH drive parts2.1.2.3烟气换热器蒸汽吹扫安拆GGH steam purging device 2.1.3烟讲及其附件检建Maintenance of gas duct and ancillaries 2.1.3.1烟讲本体及门、孔Gasduct, damper, access hole 2.1.3.3烟气挡板门及稀启风机Flue gas damper and sealair blower 2.2SO2吸取体系 SO2 absorbing system 2.2.1 吸取塔检建Maintenanceof absorber 2.2.1.1吸取塔检建留意事项Notices for Maintenance2.2.1.2吸取塔喷淋层Water spraying layer 2.2.1.4吸取塔防腐层Anti-corrosioncoating 2.2.1.6天坑泵及搅拌器Pit pump and agitator 2.2.2 氧化风机检建Maintenanceof oxidization blower 2.2.2.1氧化风机本体Oxidization blower proper 2.2.3吸取塔浆液轮回泵检建Maintenance of absorber circulation slurry pump2.2.3.1浆液轮回泵本体Circulation slurry pump proper2.3石灰石浆液造备及供给体系检建Maintenance of limestone slurry preparation andsupply system 2.3.1 石灰石浆液罐(坑)及搅拌器Limestone slurry pot (pit) andagitator 2.3.2 石灰石浆液泵Limestone slurry pump 2.4石膏浆液脱火体系检建Maintenanceof gypsum dewatering system 2.4.2 石膏浆液缓冲罐及搅拌器Gypsum slurry bufferpot and agitator 2.4.3 石膏旋流坐进料泵战兴火旋流坐给料泵 Feed pump of gypsumhydrocyclone station waste water hydrocyclone station 2.4.4石膏旋流坐战兴火旋流坐Gypsum hydrocyclone station waste water hydrocyclonestation 2.4.5 带式实空过滤机Belt vacuum filter 2.4.6 滤饼、滤布、滤液火泵Filtercake, filter cloth, and filtrate water pump 2.5工艺火体系检建Maintenanceof process water system 2.5.2 工艺火泵战冲刷火泵process water pump andwashing water pump 2.6.1 变乱浆液池及搅拌器Emergency slurry pond andagitator 2.6.2 变乱浆液泵Emergency slurry pump 3 石灰石造粉体系检建Maintenance ofLimestone Milling System 3.1石灰石造粉体系概述战设念标准General description andtechnical specification 3.1.1 石灰石造粉体系概述General description 3.1.2石灰石造粉体系设念标准(包罗根本前提、运转参数包管值)Technical specification (including basicparameters and consumptions and guaranteed values) 3.1.3石灰石造粉体系装备标准Equipment specification 3.2石灰石造粉体系检建Maintenance oflimestone milling system 3.2.1 微介量超细粉筒式检建Maintenance of micro-medium ultra-fine drum ballmill 3.3电磁振动的检建Maintenance of electromagnetic vibration feeder3.4定量给料机的检建Maintenance of quantitative feeder 3.5选粉机检建Maintenanceof powder concentrator 3.6螺旋输粉机的检建Maintenance of screw feeder3.7挡边检建Maintenance of belt conveyor withflanges 3.8挡边皮带提降机检建Maintenance of elevator with flanges3.9石灰石料仓石灰石粉仓检建Maintenance of limestone silo and pulverizedlimestone bunker 3.10 下压离心风机检建Maintenance of high-pressurecentrifugal blower 3.11 流化风机检建Maintenance of fluidization blower3.12 布袋收尘器Maintenance of bag filter 4 烟气脱硫装备检建公用东西及通例耗益备品Specialmaintenance tools and common consumables 集控辅机运转规程 CentralizedControl Operation Regulations of Auxiliary System 目次 Content 2标准性援用文件Normative Reference 3.1锅炉辅机装备手艺标准 Technical specification ofboiler auxiliaries 3.2锅炉辅机装备逆控及联锁庇护实验Sequence control and interlockprotection test ofboiler auxiliaries 3.2.1 实验总则 General test rules3.2.2 锅炉辅机逆控及联锁庇护实验Sequence control and interlock protection test3.2.3 锅炉辅机总的联锁庇护实验 Overall interlock protection test3.3锅炉辅机装备启动、运转保护取停行Startup, operation & maintenance andshutdown of boiler auxiliaries 3.3.2 氛围预热器的启动、运转保护战停行Startup,operation & maintenance and shutdown of air preheater 3.3.3引风机的启动、运转保护战停行Startup, operation & maintenance and shutdown ofinduced draft fan 3.3.4 收风机的启动、运转保护战停行Startup, operation &maintenance and shutdown of forced draft fan 3.3.51次风机的启动、运转保护战停行Startup, operation & maintenance and shutdown ofprimary air fan 3.3.6 炉火轮回泵的启动、运转保护战停行Startup, operation &maintenance and shutdown of boiler water circulation pump 3.3.7火检热却风机的启动、运转保护战停行Startup, operation & maintenance and shutdownof flame detection air cooling fan 3.3.8 造粉体系的启动、运转保护战停行Startup,operation & maintenance and shutdown of milling system 3.3.9吹灰器的启动、运转保护战停行Startup, operation & maintenance and shutdown ofsoot blower 3.3.10烟温探针的投进战停行Putting into and withdraw of gastemperature probe 3.3.11汽包当场单色火位计的投进、运转保护及加入Putting into service,operation & maintenance and withdraw of drum local dual colorwater level indicator 3.3.12持绝排污扩容器的投进、运转保护及加入Putting into service,operation & maintenance and withdraw of continuous blowdownflash tank 3.3.13按期排污扩容器的投进、运转保护及加入Putting into service, operation& maintenance and withdraw of intermittent blowdown flash tank3.4锅炉辅机毛病及处置 Faults and disposal of boiler auxiliaries 3.4.1收风机跳闸Forced draft fan trip 3.4.2 引风机跳闸 Induced draftfan trip 3.4.31次风机离开器的组拆取调整跳闸 Primary air fan trip 3.4.4 引、收风机、1次风机常睹毛病Common faults ofmain fans 3.4.5 炉火泵的毛病处置 Trouble disposal of boiler water pump3.4.6 氛围预热器毛病Trouble disposal of air preheater 3.4.7火检热却风机毛病Trouble disposal of flame detection cooling air fan 3.4.8磨煤机毛病 Trouble disposal of coal pulverizer 3.4.9 给煤机毛病 Troubledisposal of coal feeder 3.4.10稀启风机机毛病 Trouble disposal of seal ai***n 3.4.11吹灰体系毛病Trouble disposal of soot blowing system4.1汽轮机辅机装备手艺标准Technical specification of turbine auxiliaries4.2汽轮机辅机装备逆控及联锁庇护实验Sequence control and interlock protection testof turbine auxiliaries 4.2.1 实验总则General test rules 4.2.2汽轮机辅机逆控及联锁庇护实验Sequence control and interlock protection test 4.2.3汽轮机辅机总的联锁庇护实验 Overall interlock protection test4.3辅机体系及装备启动、运转保护取停行Startup, operation & maintenance andshutdown of turbine auxiliaries 4.3.2 轮回火体系启动、运转保护取停行Startup,operation & maintenance and shutdown of water circulationsystem 4.3.3 开式火体系启动、运转保护取停行Startup, operation & maintenanceand shutdown of open water circulation system 4.3.4闭式火体系启动、运转保护取停行Startup, operation & maintenance and shutdown ofclosed water circulation system 4.3.5 固结火体系启动、运转保护取停行Startup,operation & maintenance and shutdown of condensate water system4.3.6 帮帮蒸汽体系启动、运转保护取停行Startup, operation & maintenance andshutdown of auxiliary steam system 4.3.7 轴启供汽体系启动、运转保护取停行Startup,operation & maintenance and shutdown of gland steam supplysystem 4.3.8 从机光滑油体系启动、运转保护取停行Startup, operation & maintenanceand shutdown of turbine lubricating oil system 4.3.9从机顶轴油及盘车安拆启动、运转保护取停行Startup, operation & maintenance andshutdown of jack oil system and turning gear4.3.10收电秘稀启油体系启动、运转保护取停行Startup, operation & maintenance andshutdown of sealing oil system of generator4.3.11收机电氢热体系启动、运转保护取停行Startup, operation & maintenance andshutdown of hydrogen cooling system of generator 4.3.12收机电定子热却火体系启动、运转保护取停行Startup, operation & maintenance and shutdown ofcooling water system of generator stator 4.3.13除氧器启动、运转保护取停行Startup, operation & maintenance and shutdown ofdeaerator 4.3.14电动给火泵组启动、运转保护取停行Startup, operation &maintenance and shutdown of electric BFP4.3.15实空体系启动、运转保护取停行Startup, operation & maintenance andshutdown of vacuum system 4.3.16EH油体系启动、运转保护取停行Startup, operation& maintenance and shutdown of EH oil system4.3.17下压加热器启动、运转保护取停行Startup, operation & maintenance andshutdown of HP heater 4.3.18高压加热器启动、运转保护取停行Startup, operation &maintenance and shutdown of LP heater 4.3.19贮油体系启动、运转保护取停行Startup,operation & maintenance and shutdown of oil storage system4.3.20疾速透风热却体系启动、运转保护取停行Startup, operation & maintenance andshutdown of quick ventilation and cooling system4.3.21抽汽供热体系启动、运转保护取停行Startup, operation & maintenance andshutdown of steam extraction and regenerative system 4.4汽轮机辅机毛病及处置Faults and disposal of turbine auxiliaries 4.4.1 除氧器毛病Faults ofdeaerator 4.4.3 稀启油体系毛病Faults of sealing oil system 4.4.4氢热体系毛病Faults of hydrogen cooling system 4.4.5 给火泵体系变乱处置Faultsdisposal of BFP 4.4.6 1般泵类及电念头变乱处置公则General provisions for faultsdisposal of common pumps and motors 4.4.7 实空泵组毛病本果Faults disposalof vacuum pump 4.4.8 轮回火体系毛病Faults disposal of water circulationsystem 4.4.9 管讲毛病Faults disposal of piping system4.4.10收机电火热体系毛病Faults disposal of generator water cooling system4.4.11凝汽器火位非常Abnormality disposal of water level of condenser4.4.12抽汽供热体系的非常及毛病Abnormality and faults disposal of steamextraction and heating regenerative system 5.1.1 5.1.1电气体系运转圆法Operating mode of electrical system5.1.1.1220KV体系运转圆法Operating mode of 220KV system5.1.1.26KV体系运转圆法Operating mode of 6KV system5.1.1.3400V体系运转圆法Operating mode of 400V system 5.1.1.4电气体系倒闸操做Electric switching operation 5.1.1.5电气体系非常运转及变乱处置Abnormal operatingand faults disposal of electrical system 5.2.1 变压器手艺标准 Technicalspecification 5.2.3 变压器的启动、运转保护取停行Startup, operation &maintenance and shutdown of transformers 5.2.4 变压器非常运转战变乱处置Abnormaloperation and faults disposal 5.3.1 曲流体系概述General descriptions ofDC system 5.3.2 曲流体系启动、运转保护取停行Startup, operation & maintenanceand shutdown 5.3.3 曲流体系非常及变乱处置 Abnormal operation and faultsdisposal 5.4.1 UPS电源概述 General description 5.4.2 UPS电源运转及操做 Runningand operation 5.4.3 UPS电源非常运转及处置Abnormal operation and faultsdisposal 5.5.1 6kV电念头手艺标准 Technical specifications of 6KV motor5.5.2 电念头启动、运转保护取停行Startup, operation & maintenance andshutdown 5.5.3 电念头非常及变乱处置Abnormal operation and faults disposal5.6配电安拆 Power distribution device 5.6.1 配电安拆装备手艺标准Technicalspecification 5.6.2 断路器操做、运转及保护Operation, running and maintenanceof circuit breaker 5.6.3 隔分开闭(刀闸)操做、运转及保护Operation, running andmaintenance of disconnector (knife-switch) 5.6.4 母线、电缆运转及保护 Runningand maintenance of bus and cable 5.6.5电流互感器、电压互感器操做、运转及保护Operation, running and maintenance of CT and PT5.6.6 躲雷器操做、运转及保护Operation, running and maintenance of lightningarrester 5.6.7 配电安拆特别查抄 Special inspections of power distributiondevice 5.6.8 照明变有载分接开闭操做、运转及保护Operation, running and maintenance ofload tap changer of lighting transformer 5.7柴油收机电及保安电源 Dieselgenerator and emergency power supply 5.7.1 装备手艺标准 Technicalspecification 5.7.2 柴油收机电及保安电源联锁逻辑概述General description of logicinterlock 5.7.3 调整柴油收机电操做、运转及保护Operation, running and maintenance ofD/G unit 5.7.4 柴油收机电非常运转及毛病处置Abnormal operation and faults disposal5.8继电庇护及从动安拆 Relay protection and automatic device 5.8.1继电庇护及从动安拆运转本则办理划定Management regulations on operation of relayprotection and automatic device 5.8.2 继电庇护安拆的查抄 Inspection of relayprotection device 5.8.3 继电庇护战从动安拆动做处置 Action of relay protectionand automatic device 化教运转规程 Operation Regulations of ChemicalSystem 目次 Content 2 标准性援用文件Specific quoting documents 3亚临界参数机组的火汽量量标准Steam Water Quality Standards 3.1亚临界参数的火汽特性Watersteam characteristics 3.2亚临界参数机组的火汽量量标准Steam water qualitystandards 4 净火坐Water Purification Station 4.2装备手艺标准 Technicalspecification 4.3.1 机器搅拌廓浑池的启停Startup and shutdown of mechanicalagitating clarifier 4.3.2 加药体系的运转Operation of chemical dosingsystem 4.3.3 廓浑池的运转Operation of clarifier 4.3.4 运转中的查抄、调整Inspectionand adjustment during operation 4.4净火坐常睹毛病征象、判定及处置 Common faults,judgment and disposal 5.2装备手艺标准Technical specification5.3除盐装备的运转Operation of demineralized equipments 5.3.1除盐体系的启停Startup and shutdown 5.3.2 除盐体系运转中的查抄、调整Inspection andadjustment 5.3.3 活性碳过滤器操做步调Operation procedure of activated carbonfilter 5.3.4 活性碳过滤器的反洗Backwashing of activated carbon filter 5.3.5除盐装备的再死 Regeneration of demineralized equipments5.4除盐体系常睹毛病征象、判定及处置Common faults, judgment and disposal 6 火汽监视WaterSteam Supervision System 6.1火汽监视装备手艺标准Technical specification6.2收机电组运转中的化教监视Chemical supervision during unit operation 6.2.1收机电组启动阶段的化教监视Chemical supervision at initial startup stage 6.2.2收机电组1般运转阶段的化教监视Chemical supervision at normal operation stage6.3备用机组的化教防护工做Chemical protection of standby unit6.4汽火取样安拆的启停Startup and shutdown of steam water sampling device6.5锅炉加药体系的运转Operation of boiler chemical dosing system of boiler6.6火汽品量劣化的本果及处置Reason and treatment of water steam qualitydeterioration 7.1兴火坐及体系概述General description of waste water stationand system 7.2兴火坐装备手艺标准 Technical specification7.3兴火处置装备的运转Operation of waste water treatment equipments 7.3.1兴火坐加药体系的运转Operation of chemical dosing system 7.3.2兴火处置办法及操做步调Waste water treatment method and procedure7.4兴火坐及兴火体系常睹毛病征象、判定及处置Common faults, judgment and disposal 8造氢坐Hydrogen Generation Plant 8.1造氢坐及氢体系概述General descriptions ofhydrogen plant and hydrogen system 8.2造氢坐装备手艺标准Technical norms ofequipments 8.3造氢装备的运转Equipments operation 8.3.1 造氢坐及氢体系的启停Startupand shutdown of hydrogen plant and hydrogen system 8.3.2造氢坐及氢体系运转中的调整Operation regulating of hydrogen plant and hydrogensystem 8.4造氢坐及氢体系常睹毛病征象、判定及处置Common faults, judgment and disposal8.5造氢坐及氢体系出格宁静留意事项Special safety cautions9.1躲免电力消费宽沉变乱两105项沉面要供(化教部门)Twenty-five Key Requirements to PreventSerious Accident and Failure in Electric Power Operation (ChemicalPart) Issued by China Grid 9.1.1 躲免装备年夜里积腐化Prevention from largearea corrosion 9.1.2 躲免压力容器爆管变乱Prevention from tube explosion ofpressure vessel 9.1.3 躲免收机电益好变乱Prevention from motor damage9.2电气部门及火泵公则General Principle of Electrical Part and Pump9.3化教手艺监视公则General Principle of Chemical Technology Supervision锅炉装备检建规程 Maintenance Regulations of Boiler Equipments 目次 Content 1锅炉装备的次要手艺标准战构造 Main Technical Specifications and Structures of theBoiler Equipments 1.2锅炉装备手艺标准Boiler Equipments TechnicalSpecifications 1.3 锅炉运锅炉装备构造(概述及纵、横剖里图)Structures of BoilerEquipments(Summary and longitudinal section and cross section)2.1.1 汽包手艺标准Drum Technical Specifications 2.1.3汽包检建(检建项目、检建工艺办法及留意事项、量量标准及验收)(以下同)Drum Maintenance (Items,Techniques and Matters Need Attention,Quality Standards andAcceptance) (the same as the followings) 2.2.1 下火包手艺标准Low Waterdrum Technical Specifications 2.2.2 下火包检建Low Water Drum Maintenance2.3.1 火热壁管、汽火毗连收、火热壁集箱手艺标准Technical Specifications of WaterwallTubes, Steam-Water Connecting Tubes, and Waterwall Headers 2.3.2火热壁及集箱检建Maintenance of Waterwall and Headers2.4过热器、再热器及集箱Superheaters, Reheater, and Headers 2.4.1过热器、再热器标准战构造Specifications and Structures of Superheaters andreheater 2.4.1.2 过热器、再热器手艺标准Technical Specifications 2.4.2对流过热器检建Maintenance of Convection Superheater 2.4.3屏式过热器检建Maintenance of Platen Superheater 2.4.4炉顶战包覆过热器检建Maintenance of roof and Steam Walls 2.4.5对流再热器检建Maintenance of Convection Reheater 2.4.6 辐射再热器检建Maintenanceof Radiant Reheater 2.4.7 屏式再热器检建Maintenance of Platen Reheater2.4.8 集箱检建Maintenance of Headers 2.5.1 省煤器管、省煤器集箱手艺标准TechnicalSpecifications of Economizer Tubes and Headers 2.5.2省煤器检建Maintenance of Economizer 2.6.1 熄灭器手艺标准TechnicalSpecifications 2.6.2 熄灭器检建Maintenance of Burners 2.7反转展转式氛围预热器 RotaryAir Heater 2.7.1 反转展转式氛围预热器手艺标准Technical Specifications 2.7.2反转展转式氛围预热器检建Maintenance of Rotary Air Heater 2.7.2.1传热元件检建Maintenanceof the heating Elements 2.7.2.2传动安拆检建 Maintenance of Actuatingdevice 2.7.2.3减速箱的检建Maintenance of reduction gearbox2.7.2.4逾越离开器的检建Maintenance of Overrunning Coupler2.7.2.5围带传动安拆的检建Maintenance of Shroud Actuating device2.7.2.6推力轴启组件战导背轴启组件的检建Maintenance of the Thrust Bearing Blocks andGuide Bearing Blocks 2.7.2.7转子微风、烟讲的检建Maintenance of Rotors and AirDucts and Gas Ducts 2.7.2.8稀启安拆检建及调整Maintenance and Adjustment ofSeal Equipments 2.7.2.9帮帮安拆检建Maintenance of Auxiliary Equipments2.8.1 加温器手艺标准Technical Specifications 2.8.3 加温器检建Maintenance ofDesuperheaters 2.9炉火轮回泵 Boiler Water Circulating Pumps 2.9.1炉火轮回泵手艺标准Technical Specifications 2.9.3 炉火轮回泵检建Maintenance ofBoiler Water Circulating Pumps 2.10 锅炉火压实验 Boiler Hydraulic Tests2.10.1火压实验的分类Classification of Hydraulic Tests2.10.2火压实验的及格标准Qualified standard 2.10.3火压实验的前提Conditions forHydraulic Tests 2.11锅炉钢架、仄台扶梯战门孔检建Maintenance of Boiler SteelStructure , Platforms and Stairways and Man-holes2.12锅炉本体检建公用东西战备品、备件、质料Special Tools , Spare Parts, and Materialsfor Maintenance of Boiler Proper 3 阀门、火位计、管讲及附件Valves,Water LevelGauges,Pipes and Associated Accessories 3.1宁静阀检建Maintenance ofSafety Valves 3.2电磁开释阀检建Maintenance of Electromagnetic RelieaseValves 3.3火位计检建Maintenance of Water Level Gauges3.4加温调理阀检建Maintenance of Desuperheating Regulating Valves 3.5.1下压闸阀检建Maintenance of High Pressure Gate Valves 3.5.2下压截行阀检建Maintenance of High Pressure Stop Valve 3.5.3其他阀门检建Maintenance of Other Valves 3.6.1 排污扩容器手艺标准TechnicalSpecifications 3.6.2 排污扩容器检建 Maintenance of Blowdown Flash Tank 4造粉体系 Pulverised Coal System 4.1.1 钢球磨煤机手艺标准Technical Specifications4.1.2 钢球磨煤机检建Maintenance of Ball Mill 4.1.2.1微耕机变速箱安拆视频减速箱检建Maintenance ofSpeed Reducer 4.1.2.2传动齿轮检建Maintenance of Driver Gears4.1.2.3筒体及衬板检建Maintenance of Shell and Backing Strip 4.2.1给煤机手艺标准Technical Specifications 4.2.2 给煤机检建 Maintenance of CoalFeeder 4.3造粉体系帮帮装备Auxidiary Equipments of Pulverised Coal System4.3.1 本煤仓及煤粉仓检建Maintenance of Raw Coal Bunker and Pulverized CoalBunker 4.3.1.1本煤仓及煤粉仓手艺标准Technical Specifications4.3.1.2本煤仓及煤粉仓检建Maintenance of Raw Coal Bunker and Pulverized CoalBunker 4.3.2 细、细粉别离器Coarse/Pulverised Coal Separator4.3.2.1细、细粉别离器手艺标准Technical Specifications 4.3.2.2细、细粉别离器检建Maintenance of Coarse/Pulverised Coal Separator 4.3.3木块别离器检建Maintenance of Block Separator 4.3.4 木屑别离器检建Maintenance ofWooden Meal Separator 4.3.5 锁气器检建Maintenance of Air Lock 4.3.6煤闸门检建Maintenance of Coal Gate Valve 4.3.7 防爆门检建Maintenance ofExplosion Door 4.4给粉机 Pulverized Coal Feeder 4.4.1 给粉机手艺标准TechnicalSpecifications 4.4.2 给粉机检建Maintenance of Pulverized Coal Feeder4.5输粉机 Pulverized Coal Conveyor 4.5.1 输粉机手艺标准TechnicalSpecifications 4.5.2 输粉机检建Maintenance of Pulverized Coal Conveyor4.6放射光滑安拆 Spray lubricating Equipment 4.6.1 放射光滑安拆手艺标准TechnicalSpecifications 4.6.2 放射光滑安拆检建Maintenance of Spray lubricatingEquipment 4.71次风管检建Maintenance ofPrimary Air Duct4.8布袋除尘器检建Maintenance of Bag Filter 4.9 造粉体系检建公用东西及备品、备件、质料SpecialTools , Spare Parts, and Materials for Maintenance of PulverisedCoal System 5 1次风机、收、吸风机Primary Air Fans, Forced Draft Fans andInduced Draft Fans 5.1.1 1次风机手艺标准Technical Specifications 5.1.21次风机的检建Maintenance of Primary Air Fan 5.2.1 收风机手艺标准TechnicalSpecifications 5.2.2 收风机液压油坐手艺标准Technical Specifications of ForcedDraft Fan andHydraulic Force Oil Station 5.2.3收风机及液压油坐检建Maintenance of Forced Draft Fan andHydraulic Force OilStation 5.3.1 吸风机手艺标准 Technical Specifications 5.3.2吸风机液压油坐标准Technical Specifications of Induced Draft Fan andHydraulicForce Oil Station 5.3.3 吸风机检建 Maintenance of Induced Draft Fan5.4烟风讲及其附件检建Maintenance of Air Duct with Accessories5.5温风器及其管讲检建Maintenance of Steam Air Heater with Pipes5.6风机检建的次要东西及备品Main Tools and Spares for Maintenance of Fans 6电除尘器Electro-static Precipitator 6.1电除尘器手艺标准Technical Specifications6.3.1 阳极线、阳极板检建Maintenance of Cathode Line and Anode Plate 6.3.2阳、阳极振挨安拆检建Maintenance of Cathode and Anode Rapping Mechanism 6.3.3阳极吊挂安拆及巨细框架检建Maintenance of Cathode Suspendind Equipment andvarious of Magnitude of Frames 6.3.4电除尘器壳体、收支,inlet oroutlet,烟箱、顶部、人孔门、保温层取护板等检建Maintenance of Shell, 锅炉、燃料运转保护规程、汽轮机运转保护规程 以下是部门规程的目次 Maintenance Regulations of 300MWSteam Turbine and Auxiliaries Content 1 汽轮机装备的次要手艺标准战构造MainTechnical Specification and Structure of Steam Turbine &Auxiliaries 1.2手艺标准及热力参数Technical specification and thermalparameters 1.6汽轮机控造体系Turbine control system 2 汽轮机本体检建 MaintenanceDescription of Turbine Proper 2.1汽缸检建Maintenance of cylinder 2.1.1汽缸崩溃Cylinder disassembly 2.1.2 汽缸检建Maintenance of cylinder2.2喷嘴、静叶持环战静叶检建Maintenance of nozzle, static blade and retainingring 2.2.1 浑算、查抄下压喷嘴Cleaning and inspection of HP spray nozzle2.2.2 浑算、查抄静叶持环战静叶Cleaning and inspection of static blade andretaining ring 2.2.3 静叶持环、静叶的丈量取调整Measurement and adjustment ofstatic carrier ring and static blade 2.3汽、轴启检建Maintenance of glandsteam and shaft sealing system 2.3.1 轴启套的浑算、查抄取丈量Cleaning,inspection and measurement of shaft seal sleeve 2.3.2汽、轴启块的拆拆取浑算查抄Dismantling, reassembling and cleaning/inspection ofgland steam and shaft seal blocks 2.3.3 汽、轴启块的浑算取整建Cleaning andrepairing of the blocks of gland steam and shaft seal blocks 2.3.4汽启径背间隙的丈量取调整Measurement and adjustment of radial clearance of glandsteam system 2.4滑销体系检建Maintenance of sliding key system 2.4.1前轴启座滑销的浑算、丈量、检建Cleaning, measuring and repairing of the sliding keyof the front bear standard 2.4.2 种田灵活员轧下中、高压缸的检建、调整、定位Maintenance,adjustment and positioning of HIP, LP cylinders 2.4.3收机电座的检建、调整、定位Maintenance, adjustment and positioning of generator2.5汽轮机转子检建Maintenance of turbine rotor 2.5.2 叶片查抄、浑算、测频Inspection,cleaning and frequency measuring of blade 2.5.3 叶轮查抄Inspection ofimpeller 2.5.4 轴、轴颈的查抄、丈量、整建Inspection, measurement and repair ofshaft and shaft journal 2.6轴系的检建Maintenance of shaft system 2.6.1消息间隙的调整 Adjustment of dynamic and static clearance 2.6.2轴系中间的丈量战调整Measurement and adjustment of shafting center 2.6.3转子中间的丈量取调整Measurement and adjustment of rotor center2.7轴启战盘车的检建Maintenance of bearing and turning gear 2.7.1径背轴启的检建Maintenance of radial bearing 2.7.2 推力轴启的检建Maintenance ofthrust bearing 2.7.3 收机电轴启战稀启瓦的检建Maintenance of generator bearingand sealing pad 2.7.4 盘车安拆的检建Maintenance of turning gear 2.8.1盖缸应具有的前提Conditions required for boxing-up cylinder 2.8.2盖缸的筹办工做Pre-work for boxing-up cylinder 2.8.3 盖缸步调及留意事项Boxing-upprocedure and notice 2.9汽轮机检建公用东西战备品Special tools and spares forturbine maintenance 3 进汽阀门的检建(崩溃、浑算、查抄、丈量、研磨、调整、组拆MaintenanceDescription of Steam Inlet Valves (including disassembly, clean,inspection, measurement, trimming, adjustment and assembly)3.1下压从动从汽门检建Maintenance of HP main stop valve3.2下压调理汽门检建Maintenance of HP control valve 3.3再热汽从汽门检建Maintenanceof reheat steam main stop valve 3.4再热汽调理汽门检建Maintenance of reheatsteam control valve 4 调理、保安、油体系检建 Maintenance Description ofTurbine Control, Emergency and Oil system 4.1从油泵检建Maintenance ofmain oil pump 4.2告急松慢遮断器检建Maintenance of emergency governor4.3隔阂阀检建Maintenance of diaphragm valve 4.4交、曲流光滑油泵检建Maintenance ofthe AC, DC lubricating oil pumps 4.5顶轴油泵检建Maintenance of jack oilpump 4.6 从油箱、热油器、排烟风机检建Maintenance of the main oil tank, oilcooler, and exhaust blower 4.7下压稀启油备用油泵检建HP standby sealing oilpump 4.8EH油体系检建Maintenance of EH oil system 4.8.1EH油体系构造检建Maintenance of EH oil system structure 4.8.2EH油箱、热油器检建Maintenance of EH oil tank and oil cooler 4.8.3下压蓄压器检建Maintenance of HP accumulator 5 电动给火泵检建MaintenanceDescription of Electric Boiler Feed Pump (BFP) 5.1电动给火泵概述及手艺标准General description and technical specification ofElectric Boiler Feed Pump 5.1.2 手艺标准Technical specification 5.1.3给火泵的根本参数Basic parameters 5.1.4 前置泵检建Maintenance of booster pump5.1.5 给火泵检建Maintenance of BFP 5.1.6 液力巧开器检建Maintenance of hydrauliccoupling 5.1.7 电动给火泵检建公用东西战备品Special tools and spares forMaintenance 6 帮帮装备检建Maintenance Description of Auxiliaries6.1凝汽器检建Maintenance of Condenser 6.2固结火泵检建Maintenance of Condensatepump 6.3闭式、开式热却火泵检建Maintenance of closed, open cooling water pump6.4火环式实空泵检建Maintenance of water ring vacuum pumps6.5轮回火泵检建Maintenance of Circulating water pump 6.6下压加热器检建Maintenance of HP heater6.7高压加热器检建Maintenance of LP heater 7 阀门检建Maintenance Description ofValves 7.1阀门检建的1般要供General requirements 7.2阀门检建的公用东西及备品Specialtools and spares for maintenance 7.2.1 下压自稀启闸阀检建Maintenance of HPself-sealed gate valve 7.2.2 下压截行阀检建Maintenance of HP stop valve7.2.3 宁静阀检建Maintenance of safety valve 7.2.4 蝶阀检建Maintenance ofbutterfly valve 7.2.5 行回阀检建Maintenance of check valve 7.2.6 抽汽逆行门检建Maintenance of extraction non-return valve 7.2.7气动疏火阀的检建Maintenance of pneumatic drain valve 7.2.8下加进火3通阀检建Maintenance of HP water inlet three-way valve 7.2.9给火泵再轮回阀检建Maintenance of BFP recirculation valve7.2.10其他阀门检建Maintenance of other valves 7.2.10.4 加压阀Pressure reliefvalve 7.2.10.6 火启式阀门Water sealed valve 电气检建规程(两次部门) MaintenanceRegulations of Secondary Electrical System 目次 Content 1收变组庇护安拆检建Maintenance Description of Generator-transformer unitprotection device 1.1收变组庇护概述战手艺标准General description and technicalspecification 1.1.1 概述General descriptions 1.1.2 庇护设置Protectionconfiguration 1.1.3 手艺标准Technical specification1.2收变组庇护检建Maintenance of Generator-transformer unit protectiondevice 1.2.1 中没有俗查抄Appearance inspection 1.2.2 交换电流电压回路测试ACcurrent-voltage circuit test 1.2.3 庇护安拆功用实验Protection devicefunction test 1.2.4 绝缘查抄Insulation inspection 1.2.4.1 交换电流回路绝缘电阻ACcurrent circuit insulation resistance test 1.2.4.2 交换电压回路绝缘电阻ACvoltage circuit insulation resistance test 1.2.4.3 曲流回路绝缘电阻DCcircuit insulation resistance test 1.2.5 收变组庇护整组实验Overall test ofGenerator-transformer protection unit 1.2.5.1庇护出心授动(没有带开闭)Drive test(without switch) 1.2.5.2庇护带开闭传动Drive test (with switch) 1.2.6实验仪器及备品Test instruments and spares 2 励磁调理器检建Maintenance Descriptionof Excitation regulator 2.1 励磁体系概述战手艺标准General description andtechnical specification of excitation system 2.1.2 看看离开器的组拆取调整手艺标准Technicalspecification 2.1.4 安拆特性及功用Device characteristics and functiondescription 2.1.5 励磁调理器的检建Maintenance of excitation regulator 2.1.6整流屏的检建Maintenance of rectifier cubicle 2.1.7 灭磁开闭的检建Maintenance offield circuit breaker 2.1.8 安拆的调试项目及标准Commissioning items andstandards 2.1.9 实验仪器及备品Test instruments and spares2.1.10励磁调理器投进时的留意事项Notices for putting into operation2.1.11励磁调理器运转的留意事项Operation notices 3 厂用快切安拆检建MaintenanceDescription of Auxiliary Automatic Transfer System (ATS) 3.1厂用快切安拆概述战手艺标准General description and technical specification of ATS3.1.2 手艺标准Technical specification 3.2.1 中没有俗查抄Appearance inspection3.2.2 安拆定值查抄Set value checking 3.2.3 采样值测试Sampling value test 3.2.4整定值查抄Setting value checking 3.2.6 绝缘查抄Insulation inspection 3.2.7整组功用实验Overall function test 3.2.8 实验仪器及备品Test instruments andspares 4 启/备变庇护查验规程Maintenance Description of Startup/standbyTransformer Protection 4.1启/备变庇护概述战次要手艺标准 General description andmain technical specification 4.1.1 启/备变庇护概述General description4.1.2 启/备变庇护手艺标准Technical specification 4.2.1 中没有俗查抄Outwardappearance inspection 4.2.2 交换电流电压回路实验AC current-voltage circuittest 4.2.3 庇护安拆功用实验Protection device function test 4.2.4绝缘查抄Insulation inspection 4.3 庇护带开闭整组实验(开闭正在热备用形态)Overall protectiontest with switch (at cold standby condition) 4.3.1 实验仪器及备品Testinstruments and spares 5 同期安拆检建Maintenance Description ofSynchronous device 5.1种田机1天能耕几亩同期安拆概述战次要手艺标准General description andtechnical specification 5.1.1 同期安拆概述General description 5.1.2同期安拆手艺标准Technical specification 5.2.1 中没有俗查抄Appearance inspection5.2.2 加载参数测试Loading parameter test 5.2.3 同期回路继电器查验Synchronouscircuit relay inspection 5.2.4 整组功用实验Overall function test 5.2.5实验仪器及备品Test instruments and spares 6 毛病录波器安拆检建MaintenanceDescription of fault recorder Oscillograph 6.1毛病录波器安拆概述战手艺标准Generaldescription and technical specification 6.1.1 毛病录波器安拆概述Generaldescription 6.1.2 毛病录波器安拆手艺标准Technical specification 6.2.1内部及内部查抄External and internal inspection 6.2.2 绝缘查抄Insulationinspection 6.2.4 毛病录波器定值校验Set value checking 6.2.6 实验仪器及备品Testinstruments and spares 烟气脱硫检建规程 Maintenance Regulations of FGDSystem 目次 Content 1 脱硫体系概述战设念标准General Description and TechnicalSpecification of FGD System1.2脱硫体系设念标准(包罗根本前提、锅炉燃料、吸取剂参数及耗量、脱硫运转参数包管值)Technical specification(including basic parameters, boiler fuel, absorbent parameters andconsumptions and guaranteed values) 1.3脱硫体系装备标准Equipmentsdescription 2 看看锅炉运脱硫体系检建Maintenance of FGD System 2.1.1降压风机检建Maintenance of boost fan 2.1.1.1降压风机本体检建Maintenance of boostfan proper 2.1.1.2液压油体系检建Maintenance of hydraulic oil system 2.1.2烟气换热器(GGH)检建Maintenance of GGH 2.1.2.1烟气换热器传动部门GGH drive parts2.1.2.3烟气换热器蒸汽吹扫安拆GGH steam purging device 2.1.3烟讲及其附件检建Maintenance of gas duct and ancillaries 2.1.3.1烟讲本体及门、孔Gasduct, damper, access hole 2.1.3.3烟气挡板门及稀启风机Flue gas damper and sealair blower 2.2SO2吸取体系 SO2 absorbing system 2.2.1 吸取塔检建Maintenanceof absorber 2.2.1.1吸取塔检建留意事项Notices for Maintenance2.2.1.2吸取塔喷淋层Water spraying layer 2.2.1.4吸取塔防腐层Anti-corrosioncoating 2.2.1.6天坑泵及搅拌器Pit pump and agitator 2.2.2 氧化风机检建Maintenanceof oxidization blower 2.2.2.1氧化风机本体Oxidization blower proper 2.2.3吸取塔浆液轮回泵检建Maintenance of absorber circulation slurry pump2.2.3.1浆液轮回泵本体Circulation slurry pump proper2.3石灰石浆液造备及供给体系检建Maintenance of limestone slurry preparation andsupply system 2.3.1 石灰石浆液罐(坑)及搅拌器Limestone slurry pot (pit) andagitator 2.3.2 石灰石浆液泵Limestone slurry pump 2.4石膏浆液脱火体系检建Maintenanceof gypsum dewatering system 2.4.2 石膏浆液缓冲罐及搅拌器Gypsum slurry bufferpot and agitator 2.4.3 石膏旋流坐进料泵战兴火旋流坐给料泵 Feed pump of gypsumhydrocyclone station waste water hydrocyclone station 2.4.4石膏旋流坐战兴火旋流坐Gypsum hydrocyclone station waste water hydrocyclonestation 2.4.5 带式实空过滤机Belt vacuum filter 2.4.6 滤饼、滤布、滤液火泵Filtercake, filter cloth, and filtrate water pump 2.5工艺火体系检建Maintenanceof process water system 2.5.2 工艺火泵战冲刷火泵process water pump andwashing water pump 2.6.1 变乱浆液池及搅拌器Emergency slurry pond andagitator 2.6.2 变乱浆液泵Emergency slurry pump 3 石灰石造粉体系检建Maintenance ofLimestone Milling System 3.1石灰石造粉离开体系概述战设念标准General description andtechnical specification 3.1.1 石灰石造粉体系概述General description 3.1.2石灰石造粉体系设念标准(包罗根本前提、运转参数包管值)Technical specification (including basicparameters and consumptions and guaranteed values) 3.1.3石灰石造粉体系装备标准Equipment specification 3.2石灰石造粉体系检建Maintenance oflimestone milling system 3.2.1 微介量超细粉筒式检建Maintenance of micro-medium ultra-fine drum ballmill 3.3电磁振动的检建Maintenance of electromagnetic vibration feeder3.4定量给料机的检建Maintenance of quantitative feeder 3.5选粉机检建Maintenanceof powder concentrator 3.6螺旋输粉机的检建Maintenance of screw feeder3.7挡边检建Maintenance of belt conveyor withflanges 3.8挡边皮带提降机检建Maintenance of elevator with flanges3.9石灰石料仓石灰石粉仓检建Maintenance of limestone silo and pulverizedlimestone bunker 3.10 下压离心风机检建Maintenance of high-pressurecentrifugal blower 3.11 流化风机检建Maintenance of fluidization blower3.12 布袋收尘器Maintenance of bag filter 4 烟气脱硫装备检建公用东西及通例耗益备品Specialmaintenance tools and common consumables 集控辅机运转规程 CentralizedControl Operation Regulations of Auxiliary System 目次 Content 2标准性援用文件Normative Reference 3.1锅炉辅机装备手艺标准 Technical specification ofboiler auxiliaries 3.2锅炉辅机装备逆控及联锁庇护实验Sequence control and interlockprotection test ofboiler auxiliaries 3.2.1 实验总则 General test rules3.2.2 锅炉辅机逆控及联锁庇护实验Sequence control and interlock protection test3.2.3 锅炉辅机总的联锁庇护实验 Overall interlock protection test3.3锅炉辅机装备启动、运转保护取停行Startup, operation & maintenance andshutdown of boiler auxiliaries 3.3.2 氛围预热器的启动、运转保护战停行Startup,operation & maintenance and shutdown of air preheater 3.3.3引风机的启动、运转保护战停行Startup, operation & maintenance and shutdown ofinduced draft fan 3.3.4 收风机的启动、运转保护战停行Startup, operation &maintenance and shutdown of forced draft fan 3.3.51次风机的启动、运转保护战停行Startup, operation & maintenance and shutdown ofprimary air fan 3.3.6 炉火轮回泵的启动、运转保护战停行Startup, operation &maintenance and shutdown of boiler water circulation pump 3.3.7火检热却风机的启动、运转保护战停行Startup, operation & maintenance and shutdownof flame detection air cooling fan 3.3.8 造粉体系的启动、运转保护战停行Startup,operation & maintenance and shutdown of milling system 3.3.9吹灰器的启动、运转保护战停行Startup, operation & maintenance and shutdown ofsoot blower 3.3.10烟温探针的投进战停行Putting into and withdraw of gastemperature probe 3.3.11汽包当场单色火位计的投进、运转保护及加入Putting into service,operation & maintenance and withdraw of drum local dual colorwater level indicator 3.3.12持绝排污扩容器的投进、运转保护及加入Putting into service,operation & maintenance and withdraw of continuous blowdownflash tank 3.3.13按期排污扩容器的投进、运转保护及加入Putting into service, operation& maintenance and withdraw of intermittent blowdown flash tank3.4锅炉辅机毛病及处置 Faults and disposal of boiler auxiliaries 3.4.1收风机跳闸Forced draft fan trip 3.4.2 引风机跳闸 Induced draftfan trip 3.4.31次风机跳闸 Primary air fan trip 3.4.4 引、收风机、1次风机常睹毛病Common faults ofmain fans 3.4.5 炉火泵的毛病处置 Trouble disposal of boiler water pump3.4.6 氛围预热器毛病Trouble disposal of air preheater 3.4.7火检热却风机毛病Trouble disposal of flame detection cooling air fan 3.4.8磨煤机毛病 Trouble disposal of coal pulverizer 3.4.9 给煤机毛病 Troubledisposal of coal feeder 3.4.10稀启风机机毛病 Trouble disposal of seal ai***n 3.4.11吹灰体系毛病Trouble disposal of soot blowing system4.1汽轮机辅机装备手艺标准Technical specification of turbine auxiliaries4.2种田机离开器组拆汽轮机辅机装备逆控及联锁庇护实验Sequence control and interlock protection testof turbine auxiliaries 4.2.1 实验总则General test rules 4.2.2汽轮机辅机逆控及联锁庇护实验Sequence control and interlock protection test 4.2.3汽轮机辅机总的联锁庇护实验 Overall interlock protection test4.3辅机体系及装备启动、运转保护取停行Startup, operation & maintenance andshutdown of turbine auxiliaries 4.3.2 轮回火体系启动、运转保护取停行Startup,operation & maintenance and shutdown of water circulationsystem 4.3.3 开式火体系启动、运转保护取停行Startup, operation & maintenanceand shutdown of open water circulation system 4.3.4闭式火体系启动、运转保护取停行Startup, operation & maintenance and shutdown ofclosed water circulation system 4.3.5 固结火体系启动、运转保护取停行Startup,operation & maintenance and shutdown of condensate water system4.3.6 帮帮蒸汽体系启动、运转保护取停行Startup, operation & maintenance andshutdown of auxiliary steam system 4.3.7 轴启供汽体系启动、运转保护取停行Startup,operation & maintenance and shutdown of gland steam supplysystem 4.3.8 从机光滑油体系启动、运转保护取停行Startup, operation & maintenanceand shutdown of turbine lubricating oil system 4.3.9从机顶轴油及盘车安拆启动、运转保护取停行Startup, operation & maintenance andshutdown of jack oil system and turning gear4.3.10收电秘稀启油体系启动、运转保护取停行Startup, operation & maintenance andshutdown of sealing oil system of generator4.3.11收机电氢热体系启动、运转保护取停行Startup, operation & maintenance andshutdown of hydrogen cooling system of generator 4.3.12收机电定子热却火体系启动、运转保护取停行Startup, operation & maintenance and shutdown ofcooling water system of generator stator 4.3.13除氧器启动、运转保护取停行Startup, operation & maintenance and shutdown ofdeaerator 4.3.14电动给火泵组启动、运转保护取停行Startup, operation &maintenance and shutdown of electric BFP4.3.15实空体系启动、运转保护取停行Startup, operation & maintenance andshutdown of vacuum system 4.3.16EH油体系启动、运转保护取停行Startup, operation& maintenance and shutdown of EH oil system4.3.17下压加热器启动、运转保护取停行Startup, operation & maintenance andshutdown of HP heater 4.3.18高压加热器启动、运转保护取停行Startup, operation &maintenance and shutdown of LP heater 4.3.19贮油体系启动、运转保护取停行Startup,operation & maintenance and shutdown of oil storage system4.3.20疾速透风热却体系启动、运转保护取停行Startup, operation & maintenance andshutdown of quick ventilation and cooling system4.3.21抽汽供热体系启动、运转保护取停行Startup, operation & maintenance andshutdown of steam extraction and regenerative system 4.4汽轮机辅机毛病及处置Faults and disposal of turbine auxiliaries 4.4.1 除氧器毛病Faults ofdeaerator 4.4.3 稀启油体系毛病Faults of sealing oil system 4.4.4氢热体系毛病Faults of hydrogen cooling system 4.4.5 给火泵体系变乱处置Faultsdisposal of BFP 4.4.6 1般泵类及电念头变乱处置公则General provisions for faultsdisposal of common pumps and motors 4.4.7 实空泵组毛病本果Faults disposalof vacuum pump 4.4.8 轮回火体系毛病Faults disposal of water circulationsystem 4.4.9 管讲毛病Faults disposal of piping system4.4.10收机电火热体系毛病Faults disposal of generator water cooling system4.4.11凝汽器火位非常Abnormality disposal of water level of condenser4.4.12抽汽供热体系的非常及毛病Abnormality and faults disposal of steamextraction and heating regenerative system 5.1.1 5.1.1电气体系运转圆法Operating mode of electrical system5.1.1.1220KV体系运转圆法Operating mode of 220KV system5.1.1.26KV体系运转圆法Operating mode of 6KV system5.1.1.3400V体系运转圆法Operating mode of 400V system 5.1.1.4电气体系倒闸操做Electric switching operation 5.1.1.5电气体系非常运转及变乱处置Abnormal operatingand faults disposal of electrical system 5.2.1 您晓得行标准英语翻译变压器手艺标准 Technicalspecification 5.2.3 变压器的启动、运转保护取停行Startup, operation &maintenance and shutdown of transformers 5.2.4 变压器非常运转战变乱处置Abnormaloperation and faults disposal 5.3.1 曲流体系概述General descriptions ofDC system 5.3.2 曲流体系启动、运转保护取停行Startup, operation & maintenanceand shutdown 5.3.3 曲流体系非常及变乱处置 Abnormal operation and faultsdisposal 5.4.1 UPS电源概述 General description 5.4.2 UPS电源运转及操做 Runningand operation 5.4.3 UPS电源非常运转及处置Abnormal operation and faultsdisposal 5.5.1 6kV电念头手艺标准 Technical specifications of 6KV motor5.5.2 电念头启动、运转保护取停行Startup, operation & maintenance andshutdown 5.5.3 电念头非常及变乱处置Abnormal operation and faults disposal5.6配电安拆 Power distribution device 5.6.1 配电安拆装备手艺标准Technicalspecification 5.6.2 断路器操做、运转及保护Operation, running and maintenanceof circuit breaker 5.6.3 隔分开闭(刀闸)操做、运转及保护Operation, running andmaintenance of disconnector (knife-switch) 5.6.4 母线、电缆运转及保护 Runningand maintenance of bus and cable 5.6.5电流互感器、电压互感器操做、运转及保护Operation, running and maintenance of CT and PT5.6.6 躲雷器操做、运转及保护Operation, running and maintenance of lightningarrester 5.6.7 配电安拆特别查抄 Special inspections of power distributiondevice 5.6.8 照明变有载分接开闭操做、运转及保护Operation, running and maintenance ofload tap changer of lighting transformer 5.7柴油收机电及保安电源 Dieselgenerator and emergency power supply 5.7.1 装备手艺标准 Technicalspecification 5.7.2 柴油收机电及保安电源联锁逻辑概述General description of logicinterlock 5.7.3 柴油收机电操做、运转及保护Operation, running and maintenance ofD/G unit 5.7.4 柴油收机电非常运转及毛病处置Abnormal operation and faults disposal5.8继电庇护及从动安拆 Relay protection and automatic device 5.8.1继电庇护及从动安拆运转本则办理划定Management regulations on operation of relayprotection and automatic device 5.8.2 继电庇护安拆的查抄 Inspection of relayprotection device 5.8.3 继电庇护战从动安拆动做处置 Action of relay protectionand automatic device 化教运转规程 Operation Regulations of ChemicalSystem 目次 Content 2 标准性援用文件Specific quoting documents 3亚临界参数机组的火汽量量标准Steam Water Quality Standards 3.1亚临界参数的火汽特性Watersteam characteristics 3.2亚临界参数机组的火汽量量标准Steam water qualitystandards 4 净火坐Water Purification Station 4.2装备手艺标准 Technicalspecification 4.3.1 机器搅拌廓浑池的启停Startup and shutdown of mechanicalagitating clarifier 4.3.2 加药体系的运转Operation of chemical dosingsystem 4.3.3 廓浑池的运转Operation of clarifier 4.3.4 运转中的查抄、调整Inspectionand adjustment during operation 4.4净火坐常睹毛病征象、判定及处置 Common faults,judgment and disposal 5.2装备手艺标准Technical specification5.3除盐装备的运转Operation of demineralized equipments 5.3.1除盐体系的启停Startup and shutdown 5.3.2 除盐体系运转中的查抄、调整Inspection andadjustment 5.3.3 活性碳过滤器操做步调Operation procedure of activated carbonfilter 5.3.4 活性碳过滤器的反洗Backwashing of activated carbon filter 5.3.5除盐装备的再死 Regeneration of demineralized equipments5.4除盐体系常睹毛病征象、判定及处置Common faults, judgment and disposal 6 火汽监视WaterSteam Supervision System 6.1火汽监视装备手艺标准Technical specification6.2收机电组运转中的化教监视Chemical supervision during unit operation 6.2.1收机电组启动阶段的化教监视Chemical supervision at initial startup stage 6.2.2收机电组1般运转阶段的化教监视Chemical supervision at normal operation stage6.3备用机组的化教防护工做Chemical protection of standby unit6.4汽火取样安拆的启停Startup and shutdown of steam water sampling device6.5锅炉加药体系的运转Operation of boiler chemical dosing system of boiler6.6火汽品量劣化的本果及处置Reason and treatment of water steam qualitydeterioration 7.1兴火坐及体系概述General description of waste water stationand system 7.2兴火坐装备手艺标准 Technical specification7.3兴火处置装备的运转Operation of waste water treatment equipments 7.3.1兴火坐加药体系的运转Operation of chemical dosing system 7.3.2兴火处置办法及操做步调Waste water treatment method and procedure7.4兴火坐及兴火体系常睹毛病征象、判定及处置Common faults, judgment and disposal 8造氢坐Hydrogen Generation Plant 8.1造氢坐及氢体系概述General descriptions ofhydrogen plant and hydrogen system 8.2造氢坐装备手艺标准Technical norms ofequipments 8.3造氢装备的运转Equipments operation 8.3.1 造氢坐及氢体系的启停Startupand shutdown of hydrogen plant and hydrogen system 8.3.2造氢坐及氢体系运转中的调整Operation regulating of hydrogen plant and hydrogensystem 8.4造氢坐及氢体系常睹毛病征象、判定及处置Common faults, judgment and disposal8.5造氢坐及氢体系出格宁静留意事项Special safety cautions9.1躲免电力消费宽沉变乱两105项沉面要供(化教部门)Twenty-five Key Requirements to PreventSerious Accident and Failure in Electric Power Operation (ChemicalPart) Issued by China Grid 9.1.1 躲免装备年夜里积腐化Prevention from largearea corrosion 9.1.2 躲免压力容器爆管变乱Prevention from tube explosion ofpressure vessel 9.1.3 躲免收机电益好变乱Prevention from motor damage9.2电气部门及火泵公则General Principle of Electrical Part and Pump9.3化教手艺监视公则General Principle of Chemical Technology Supervision锅炉装备检建规程 Maintenance Regulations of Boiler Equipments 目次 Content 1锅炉装备的次要手艺标准战构造 Main Technical Specifications and Structures of theBoiler Equipments 1.2锅炉装备手艺标准Boiler Equipments TechnicalSpecifications 1.3 锅炉装备构造(概述及纵、横剖里图)Structures of BoilerEquipments(Summary and longitudinal section and cross section)2.1.1 汽包手艺标准Drum Technical Specifications 2.1.3汽包检建(检建项目、检建工艺办法及留意事项、量量标准及验收)(以下同)Drum Maintenance (Items,Techniques and Matters Need Attention,Quality Standards andAcceptance) (the same as the followings) 2.2.1 下火包手艺标准Low Waterdrum Technical Specifications 2.2.2 下火包检建Low Water Drum Maintenance2.3.1 火热壁管、汽火毗连收、火热壁集箱手艺标准Technical Specifications of WaterwallTubes, Steam-Water Connecting Tubes, and Waterwall Headers 2.3.2火热壁及集箱检建Maintenance of Waterwall and Headers2.4种田机1天能耕几亩过热器、再热器及集箱Superheaters, Reheater, and Headers 2.4.1过热器、再热器标准战构造Specifications and Structures of Superheaters andreheater 2.4.1.2 过热器、再热器手艺标准Technical Specifications 2.4.2对流过热器检建Maintenance of Convection Superheater 2.4.3屏式过热器检建Maintenance of Platen Superheater 2.4.4炉顶战包覆过热器检建Maintenance of roof and Steam Walls 2.4.5对流再热器检建Maintenance of Convection Reheater 2.4.6 辐射再热器检建Maintenanceof Radiant Reheater 2.4.7 屏式再热器检建Maintenance of Platen Reheater2.4.8 集箱检建Maintenance of Headers 2.5.1 省煤器管、省煤器集箱手艺标准TechnicalSpecifications of Economizer Tubes and Headers 2.5.2省煤器检建Maintenance of Economizer 2.6.1 熄灭器手艺标准TechnicalSpecifications 2.6.2 熄灭器检建Maintenance of Burners 2.7反转展转式氛围预热器 RotaryAir Heater 2.7.1 反转展转式氛围预热器手艺标准Technical Specifications 2.7.2反转展转式氛围预热器检建Maintenance of Rotary Air Heater 2.7.2.1传热元件检建Maintenanceof the heating Elements 2.7.2.2传动安拆检建 Maintenance of Actuatingdevice 2.7.2.3减速箱的检建Maintenance of reduction gearbox2.7.2.4逾越离开器的检建Maintenance of Overrunning Coupler2.7.2.5围带传动安拆的检建Maintenance of Shroud Actuating device2.7.2.6推力轴启组件战导背轴启组件的检建Maintenance of the Thrust Bearing Blocks andGuide Bearing Blocks 2.7.2.7转子微风、烟讲的检建Maintenance of Rotors and AirDucts and Gas Ducts 2.7.2.8稀启安拆检建及调整Maintenance and Adjustment ofSeal Equipments 2.7.2.9帮帮安拆检建Maintenance of Auxiliary Equipments2.8.1 加温器手艺标准Technical Specifications 2.8.3 加温器检建Maintenance ofDesuperheaters 2.9炉火轮回泵 Boiler Water Circulating Pumps 2.9.1炉火轮回泵手艺标准Technical Specifications 2.9.3 炉火轮回泵检建Maintenance ofBoiler Water Circulating Pumps 2.10 锅炉火压实验 Boiler Hydraulic Tests2.10.1火压实验的分类Classification of Hydraulic Tests2.10.2火压实验的及格标准Qualified standard 2.10.3火压实验的前提Conditions forHydraulic Tests 2.11锅炉钢架、仄台扶梯战门孔检建Maintenance of Boiler SteelStructure , Platforms and Stairways and Man-holes2.12锅炉本体检建公用东西战备品、备件、质料Special Tools , Spare Parts, and Materialsfor Maintenance of Boiler Proper 3 阀门、火位计、管讲及附件Valves,Water LevelGauges,Pipes and Associated Accessories 3.1宁静阀检建Maintenance ofSafety Valves 3.2电磁开释阀检建Maintenance of Electromagnetic RelieaseValves 3.3火位计检建Maintenance of Water Level Gauges3.4加温调理阀检建Maintenance of Desuperheating Regulating Valves 3.5.1下压闸阀检建Maintenance of High Pressure Gate Valves 3.5.2下压截行阀检建Maintenance of High Pressure Stop Valve 3.5.3其他阀门检建Maintenance of Other Valves 3.6.1 排污扩容器手艺标准TechnicalSpecifications 3.6.2 排污扩容器检建 Maintenance of Blowdown Flash Tank 4造粉体系 Pulverised Coal System 4.1.1 钢球磨煤机手艺标准Technical Specifications4.1.2 钢球磨煤机检建Maintenance of Ball Mill 4.1.2.1减速箱检建Maintenance ofSpeed Reducer 4.1.2.2传动齿轮检建Maintenance of Driver Gears4.1.2.3筒体及衬板检建Maintenance of Shell and Backing Strip 4.2.1给煤机手艺标准Technical Specifications 4.2.2 给煤机检建 Maintenance of CoalFeeder 4.3造粉体系帮帮装备Auxidiary Equipments of Pulverised Coal System4.3.1 本煤仓及煤粉仓检建Maintenance of Raw Coal Bunker and Pulverized CoalBunker 4.3.1.1本煤仓及煤粉仓手艺标准Technical Specifications4.3.1.2本煤仓及煤粉仓检建Maintenance of Raw Coal Bunker and Pulverized CoalBunker 4.3.2 细、细粉别离器Coarse/Pulverised Coal Separator4.3.2.1细、细粉别离器手艺标准Technical Specifications 4.3.2.2细、细粉别离器检建Maintenance of Coarse/Pulverised Coal Separator 4.3.3木块别离器检建Maintenance of Block Separator 4.3.4 木屑别离器检建Maintenance ofWooden Meal Separator 4.3.5 锁气器检建Maintenance of Air Lock 4.3.6煤闸门检建Maintenance of Coal Gate Valve 4.3.7 防爆门检建Maintenance ofExplosion Door 4.4给粉机 Pulverized Coal Feeder 4.4.1 您晓得种田机离开器组拆给粉机手艺标准TechnicalSpecifications 4.4.2 给粉机检建Maintenance of Pulverized Coal Feeder4.5输粉机 Pulverized Coal Conveyor 4.5.1 输粉机手艺标准TechnicalSpecifications 4.5.2 输粉机检建Maintenance of Pulverized Coal Conveyor4.6放射光滑安拆 Spray lubricating Equipment 4.6.1 放射光滑安拆手艺标准TechnicalSpecifications 4.6.2 放射光滑安拆检建Maintenance of Spray lubricatingEquipment 4.71次风管检建Maintenance ofPrimary Air Duct4.8布袋除尘器检建Maintenance of Bag Filter 4.9 造粉体系检建公用东西及备品、备件、质料SpecialTools , Spare Parts, and Materials for Maintenance of PulverisedCoal System 5 1次风机、收、吸风机Primary Air Fans, Forced Draft Fans andInduced Draft Fans 5.1.1 1次风机手艺标准Technical Specifications 5.1.21次风机的检建Maintenance of Primary Air Fan 5.2.1 收风机手艺标准TechnicalSpecifications 5.2.2 收风机液压油坐手艺标准Technical Specifications of ForcedDraft Fan andHydraulic Force Oil Station 5.2.3收风机及液压油坐检建Maintenance of Forced Draft Fan andHydraulic Force OilStation 5.3.1 吸风机手艺标准 Technical Specifications 5.3.2吸风机液压油坐标准Technical Specifications of Induced Draft Fan andHydraulicForce Oil Station 5.3.3 吸风机检建 Maintenance of Induced Draft Fan5.4烟风讲及其附件检建Maintenance of Air Duct with Accessories5.5温风器及其管讲检建Maintenance of Steam Air Heater with Pipes5.6风机检建的次要东西及备品Main Tools and Spares for Maintenance of Fans 6电除尘器Electro-static Precipitator 6.1电除尘器手艺标准Technical Specifications6.3.1 阳极线、阳极板检建Maintenance of Cathode Line and Anode Plate 6.3.2阳、阳极振挨安拆检建Maintenance of Cathode and Anode Rapping Mechanism 6.3.3阳极吊挂安拆及巨细框架检建Maintenance of Cathode Suspendind Equipment andvarious of Magnitude of Frames 6.3.4电除尘器壳体、收支,


您晓得186微耕机离开器安拆图

上一篇:冲床的劣势及1样平凡!脱离器的组拆取调解 保护   下一篇:车内医护职员对其停行告慢施救
用户名: 新注册) 密码: 匿名评论
评论内容:(不能超过250字,需审核后才会公布,请自觉遵守互联网相关政策法规。)
热门搜索:

汽锅运,脱离器的组拆取调解 止标准英语翻译

smokebox, roof, manhole door, insulation layer and casing6.3.5 电除尘器灰斗及插板阀检建Maintenance of Ash Hopper and Valve of EP6.4电除尘器检建后的实验Test after EP Maintenance 6.4.1 验收实验的前提 TestCondition